DMMT2907A document number: ds35106 rev: 1 - 2 1 of 7 www.diodes.com april 2011 ? diodes incorporated DMMT2907A advance information 60v dual pnp small signal surface mount transistor features & benefits ? bv ceo > -60v ? i cm = -1a peak pulse current ? general purpose npn transistors ideally suited for low power amplification and switching applications ? dual transistors in a singl e sot26 package taking half the footprint of two equivalent transistors in sot23 ? epitaxial planar die construction ? ?lead free?, rohs compliant (note 1) ? halogen and antimony free. "green" device (note 2) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sot26 ? case material: molded plasti c, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: solderable per mil-std-202, method 208 ? lead free plating: matte tin finish annealed over copper leadframe ? weight: 0.015 grams (approximate) ordering information (note 3) product marking reel size (inches) tape width (mm) quantity per reel DMMT2907A-7 907 7 8 3,000 notes: 1. no purposefully added lead. 2. diodes inc?s ?green? policy can be found on our website at http://www.diodes.com 3. for packaging details, go to our website at http://www.diodes.com marking information 907 = product type marking code top view device s y mbol sot26 top view pin-out c2 e2 b2 c 1 e1 b1 c1 e1 c2 b1 e2 b2 907
DMMT2907A document number: ds35106 rev: 1 - 2 2 of 7 www.diodes.com april 2011 ? diodes incorporated DMMT2907A advance information maximum ratings @t a = 25c unless otherwise specified characteristic symbol value unit collector-base voltage v cbo -60 v collector-emitter voltage v ceo -60 v emitter-base voltage v ebo -5 v continuous collector current i c -600 ma peak pulsed collector current i cm -1 a thermal characteristics @t a = 25c unless otherwise specified characteristic symbol value unit power dissipation linear derating factor (notes 5 & 6) p d 1.28 10.3 w mw/ c (notes 4 & 6) 0.90 7.14 thermal resistance, junction to ambient (notes 5 & 6) r ja 97 c/w (notes 4 & 6) 140 thermal resistance, junction to lead (note 7) r jl 113 operating and storage temperature range t j , t stg -55 to +150 c notes: 4. for a device surface mounted on 25mm x 25mm x 1.6mm fr4 pcb with high coverage of single sided 1oz copper, in still a ir conditions; the device is measured when operating in a steady-state condition. 5. same as note (4), except the device is measured at t 5 sec. 6. for a dual device with one active die. 7. thermal resistance from junction to solder-point (at the end of the collector lead).
DMMT2907A document number: ds35106 rev: 1 - 2 3 of 7 www.diodes.com april 2011 ? diodes incorporated DMMT2907A advance information thermal characteristics 100m 1 10 100 10m 100m 1 25mm x 25mm 1oz cu t amb =25c single pulse v ce(sat) limited 100s 1ms 10ms 100ms 1s dc safe operating area -i c collector current (a) -v ce collector-emitter voltage (v) 0 20 40 60 80 100 120 140 160 0.0 0.2 0.4 0.6 0.8 1.0 25mm x 25mm 1oz cu derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 20 40 60 80 100 120 140 25mm x 25mm 1oz cu t amb =25c transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 25mm x 25mm 1oz cu t amb =25c single pulse pulse power dissipation pulse width (s) maximum power (w)
DMMT2907A document number: ds35106 rev: 1 - 2 4 of 7 www.diodes.com april 2011 ? diodes incorporated DMMT2907A advance information electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition off characteristics collector-base breakdown voltage bv cbo -60 ? ? v i c = -10 a, i e = 0 collector-emitter breakdown voltage (note 8) bv ceo -60 ? ? v i c = -10ma, i b = 0 emitter-base breakdown voltage bv ebo -5 ? ? v i e = -10 a, i c = 0 collector-base cutoff current i cbo ? ? -10 na v cb = -50v, i e = 0 ? ? -10 a v cb = -50v, i e = 0, t a = 150c collector-emitter cutoff current i cev ? ? 50 na v ce = -30v, v be = 0.25v base-emitter cutoff current i bev ? ? 50 na v ce = -30v, v be = 0.25v on characteristics (note 8) dc current gain h fe 75 ? ? ? i c = -100 a, v ce = -10v 100 ? ? i c = -1.0ma, v ce = -10v 100 ? ? i c = -10ma, v ce = -10v 100 ? 300 i c = -150ma, v ce = -10v 50 ? ? i c = -500ma, v ce = -10v collector-emitter saturation voltage v ce(sat) ? ? -0.4 v i c = -150ma, i b = -15ma ? ? -1.6 i c = -500ma, i b = -50ma base-emitter saturation voltage v be(sat) ? ? -1.3 v i c = -150ma, i b = -15ma ? ? -2.6 i c = -500ma, i b = -50ma small signal characteristics output capacitance c obo ? 5.2 ? pf v cb = -10v, f = 1.0mhz, i e = 0ma input capacitance c ibo ? 16.3 ? pf v eb = -2.0v, f = 1.0mhz, i c = 0ma current gain-bandwidth product f t 200 307 ? mhz v ce = -2v, i c = -10ma, f = 100mhz turn-on time t on ? ? 21 ns v cc = -30v i c = -150ma, i b1 = -15ma delay time t d ? ? 5.5 ns rise time t r ? ? 15.3 ns turn-off time t off ? ? 200 ns v cc = -6v i c = -150ma, i b1 = i b2 = -15ma storage time t s ? ? 160 ns fall time t f ? ? 40 ns notes: 8. measured under pulsed conditions. pulse width 300 s. duty cycle 2%.
DMMT2907A document number: ds35106 rev: 1 - 2 5 of 7 www.diodes.com april 2011 ? diodes incorporated DMMT2907A advance information typical electrical characteristics 25 50 75 100 125 0.01 0.1 1 10 10m 100m 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1m 10m 100m 1 0 50 100 150 200 250 1m 10m 100m 1 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 0.4 0.6 0.8 1.0 1.2 10m 100m 1 10 100 0 10 20 30 i cbo v t a v cb = 35v - i cbo collector current (na) t a ambient temperature (c) 125c v be(sat) v i c i c /i b =10 25c -40c - v ce(sat) (v) - i c collector current (a) h fe v i c v ce =5v -40c 25c 125c - i c collector current (a) 25c v ce(sat) v i c i c /i b =10 125c -40c - v be(sat) (v) - i c collector current (a) v be(on) v i c v ce =5v 125c 25c -40c - v be(on) (v) - i c collector current (a) capacitance v voltage f = 1mhz cobo cibo capacitance (pf) - voltage(v) typical gain (h fe )
DMMT2907A document number: ds35106 rev: 1 - 2 6 of 7 www.diodes.com april 2011 ? diodes incorporated DMMT2907A advance information package outline dimensions suggested pad layout sot26 dim min max typ a 0.35 0.50 0.38 b 1.50 1.70 1.60 c 2.70 3.00 2.80 d ? ? 0.95 h 2.90 3.10 3.00 j 0.013 0.10 0.05 k 1.00 1.30 1.10 l 0.35 0.55 0.40 m 0.10 0.20 0.15 0 8 ? all dimensions in mm dimensions value (in mm) z 3.20 g 1.60 x 0.55 y 0.80 c1 2.40 c2 0.95 a m j l d b c h k x z y c1 c2 c2 g
DMMT2907A document number: ds35106 rev: 1 - 2 7 of 7 www.diodes.com april 2011 ? diodes incorporated DMMT2907A advance information important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2011, diodes incorporated www.diodes.com
|
